Z1 Motorsport E85 1000cc Injectors – Plug-and-Play Fueling for 800+whp VQ37VHR Builds
Z1 Motorsport E85 1000cc injectors for the VQ37VHR are built for serious fueling when you’re pushing boost or running full E85 and the stock injectors just can’t keep up, delivering 1000cc/min of precise flow to support 800+whp builds while maintaining clean idle and consistent AFRs thanks to their high-impedance design that plays nice with the factory ECU and popular standalones like UpRev and EcuTek. These injectors feature stainless steel construction with ethanol-compatible internals and a fine-spray multi-hole nozzle that improves atomization for better combustion efficiency, cooler cylinder temps, and more reliable power on pump E85 or race fuel, plus they’re flow-matched to within 1% so you don’t get cylinder-to-cylinder imbalances that can torch a piston on a boosted VQ. Direct plug-and-play fitment means they drop into the stock VQ37VHR fuel rails without adapters or harness cutting, making install straightforward for G37, 370Z, and Q50 owners, and they’re tuned specifically to handle E85’s corrosive properties and higher volume demands without leaning out under load. Whether you’re running a single turbo, twin turbo, or a high-compression NA setup, these 1000cc injectors give you the headroom to crank up boost safely while keeping drivability on point, and they’ve become a go-to in the VQ community for anyone chasing real power without sacrificing street manners or reliability.
Key Features:
- 1000cc/min Flow Rate: Delivers enough fuel to support 800+whp on E85 or race fuel for boosted VQ37VHR builds.
- E85 Compatible Construction: Stainless steel internals and ethanol-resistant seals handle E85’s corrosive properties without degrading.
- High-Impedance Design: Works seamlessly with the factory VQ37VHR ECU and aftermarket ECUs like UpRev and EcuTek without needing a resistor box.
- Flow-Matched to 1%: Each injector is flow-matched for balanced fueling across all six cylinders to prevent lean conditions and protect the engine.
- Multi-Hole Fine Spray Nozzle: Provides better fuel atomization for improved combustion, cooler cylinder temps, and more efficient power.
- Direct Plug-and-Play Fitment: Drops straight into stock VQ37VHR fuel rails on 370Z, G37, and Q50 with no adapters or wiring modifications.
- 800+whp Fueling Headroom: Gives boosted or high-compression NA builds plenty of capacity for aggressive tuning without maxing out duty cycle.
- Consistent Idle & Drivability: Tuned for smooth idle and part-throttle control so you don’t sacrifice street manners for power.
- Durable Stainless Steel Body: Built to withstand high pressure and heat from turbo or supercharger setups for long-term reliability.
- Optimized for VQ37VHR: Specifically calibrated for the VQ37VHR’s fuel demands and injector angle to ensure proper spray pattern and performance.