370Z TERMINATOR LOOK Carbon Fiber Hood | Real 2x2 Twill | 2009-2020 | Functional Vents | 13-17 lb Lighter

Give your Z34 the most menacing front end on the street with the TERMINATOR LOOK Carbon Fiber Hood for 2009-2020 Nissan 370Z, because this hood ditches the soft OEM lines for an aggressive, angular design inspired by time attack and GT race cars with a raised center power bulge and deep set heat extractor vents that actually function, and it’s built from genuine 2x2 twill weave carbon fiber vacuum-infused over a reinforced FRP fiberglass skeleton to cut 13-17 lbs off the nose of your car while maintaining daily-driver durability so you don’t get the cracking, stress fractures, or wave distortions that happen with cheap dry carbon or single-layer hoods, and every TERMINATOR hood is hand-laid by skilled techs to ensure the weave flows perfectly symmetrical from the cowl to the leading edge with zero bubbles, dry spots, or resin pooling, then sealed under 4+ coats of UV-stable automotive clear that’s color-sanded and machine buffed to a deep, wet gloss that won’t yellow, haze, or delaminate after years of sun, track heat, and washes, and the clear depth makes the carbon pop even on cloudy days, and the vents are fully opened and angled to create low pressure zones that pull hot air out of the engine bay which drops intake temps, reduces heat soak on your VQ37VHR, and helps your radiator shed heat faster during spirited driving or track sessions, and unlike fake vented hoods these come with optional aluminum mesh screens to keep leaves, water, and track debris out of your bay while still flowing air, and fitment is dialed using an OEM 370Z aluminum hood as the mold so all your factory hinges, latch, and bump stops bolt right up with no drilling, slotting, or hood pin nonsense required, and the body lines match the Z34 fenders and bumper perfectly so you get tight, even gaps with no raised corners or wavy edges, and the underside is finished in matte black with reinforced mounting plates so it looks clean at shows and won’t flex or flutter at triple-digit speeds, and you keep full use of OEM hood struts, washer nozzles, and insulation if you want it quiet, and the TERMINATOR name comes from the sharp, angular vent design and aggressive center bulge that makes the front of your 370Z look like it’s hunting, and it clears all intakes including Stillen Gen 3, Admin Tuning, Z1, and most supercharger kits without rubbing, and installation takes about an hour with a friend because it’s a true bolt-on replacement, and it’s compatible with all 370Z trims from Base to NISMO 2009-2020, so whether you’re building a show car, street beast, or track weapon, this hood delivers real carbon fiber, real weight savings, real heat extraction, and the most aggressive styling available for the Z34 platform, and every hood is QC checked for weave alignment, clear depth, and fitment before shipping so you don’t get stuck with a warped or mismatched panel.