Free Shipping $1000+
Home/Products/Admintuning 3" Cold Air Intake | Fits 2009-2020 Nissan 370Z | VQ37VHR | True Cold Air Design | +12-16 WHP Gains | Boost Performance
Admintuning 3" Cold Air Intake | Fits 2009-2020 Nissan 370Z | VQ37VHR | True Cold Air Design | +12-16 WHP Gains | Boost Performance
Engine Performance

Admintuning 3" Cold Air Intake | Fits 2009-2020 Nissan 370Z | VQ37VHR | True Cold Air Design | +12-16 WHP Gains | Boost Performance

Rating: 5/5
$449.99$526.99Save 15%

Boost performance on your 2009-2020 Nissan 370Z with the Admintuning 3" Cold Air Intake engineered specifically for the VQ37VHR, because the factory airboxes are baffled and heat-soaked while most short ram intakes just suck hot engine bay air that kills power and consistency, while this true cold air system relocates massive 3-inch mandrel-bent aluminum piping with velocity stack entries deep into the front bumper to pull dense, ambient air from outside the engine bay, and the enlarged 3" diameter over the 2.5" OEM piping increases airflow volume and velocity to feed the VHR’s high-RPM demand, delivering real +12-16 WHP and +9-13 WTQ gains with a tune by reducing IATs up to 40°F vs stock and short rams, and it’s a direct bolt-on for all 370Z Base, Touring, Sport, and Nismo models with manual or automatic transmissions using the factory MAF housings and OEM mounting points so you get perfect fitment with no cutting, drilling, or relocating required, and it includes dual high-flow dry filter elements with stainless steel mesh and inverted cones that maximize surface area for better filtration and flow while keeping water ingestion protection, and the pipes are TIG-welded, polished, and use multi-ply silicone couplers with stainless T-bolt clamps to prevent boost leaks and collapsing under vacuum, and the intake retains proper MAF scaling and laminar flow so you get smooth idle and fuel trims with no CEL on a stock ECU, though a tune unlocks max gains by adjusting for the increased airflow, and the aggressive intake growl at WOT turns the VQ37VHR into a monster while maintaining quiet, OEM-like drivability at part throttle, and every kit is pressure-tested and includes heat-shielded MAF housings to prevent false readings from engine heat, making this the best bolt-on mod for 370Z owners who want proven cold air gains, consistent performance on the street and track, and that signature intake sound without the heat soak and bog of cheap short rams.

Key Features:

  • Fits 2009-2020 Nissan 370Z: Direct bolt-on for all VQ37VHR models. Base, Touring, Sport, and Nismo trims, manual or automatic supported.
  • True +12-16 WHP Gains: 3" mandrel-bent piping increases airflow over stock 2.5". Adds +9-13 WTQ with tune and reduced IATs.
  • Cold Air Bumper Location: Relocates filters outside engine bay for dense, ambient air. Drops intake temps up to 40°F vs short ram intakes.
  • 3" Diameter Velocity Stack Inlets: Larger cross-section feeds VHR’s high-RPM demand. Smooth radius improves airflow and throttle response.
  • Dual High-Flow Dry Filters: Inverted cone design with stainless mesh maximizes surface area. Washable, oil-free, and water-resistant.
  • Retains Factory MAF Housings: Uses OEM MAF sensors and mounting for proper scaling. No CEL, smooth idle, and stable fuel trims on stock ECU.
  • Polished Aluminum Piping: TIG-welded and heat-treated for strength. Resists corrosion and looks clean in the engine bay.
  • Multi-Ply Silicone & T-Bolt Clamps: Boost-leak free connections that won’t collapse under vacuum. Includes heat-shielded MAF sections.
  • No Cutting or Relocating Required: Bolt-on install using factory mounting points. Keeps washer reservoir and all OEM components.
  • Aggressive WOT Sound, Quiet Cruise: Deep intake growl under throttle with OEM-like drivability. Zero drone or rasp during daily driving.
Quantity:
1
Free shipping on orders over $1000
30 Days